This product is intended for professional use only Quick Specs: Average Coverage Over Flake 40m2 per kit Pot Life 10 minutes Working time on floor 12-15 minutes Cure time 2-3 hours Critical recoat time 4 hours 100% UV Stable 4x the abrasion resistance of...
This product is intended for professional use only Quick Specs: Average Coverage: 40m2 per Kit 100% Solids Cured for flake recovery in 2 hours Recoat time: 1.5 - 2 hours Pot life 3-5 minutes Working time on floor: 15-20 minutes Primer/Base Coat in one...
The E2U Flake System You get a total of 11.33kgs per box! Part of our Flake floor same day install system along with 6150RC and Polyaspartic85 ULTRA or PolyasparticRC. Quick Specs: 30m2 typical coverage per box at full broadcast (not allowing for reclaim) 1/4"...
Dust Mop - Industrial mop is 135cm length of handle with soft and comfortable sponge , it make sure the holding feeling more better .Wide mop adjustable swivel lock allows the handle 180° swiveling, in...
Dust Mop - Industrial mop is 135cm length of handle with soft and comfortable sponge , it make sure the holding feeling more better .Wide mop adjustable swivel lock allows the handle 180° swiveling, in order to clean under the furniture easily.
Dust Mop - Dust mop head size is L 69cm * W 13cm when fully spread out. Do not put wide mop head in the washing machine or dryer , Hand wash mop head in water with detergent , then rinse it . And not use bleach or fabric softeners on the mop head .
Dust Mop - Garage mop specially for Cleaning Industrial | Commercial large area , Perfect for all types of surface areas including office floors, shopping mall floor ,hospital floor ,restaurant floors, garages, warehouses, hard wooden floor , Laminate ,marble floors, tile floors, cement floors, etc.
This product is intended for professional use only Quick Specs: Average Coverage Over Flake 40m2 per kit Pot Life 10 minutes Working time on floor 12-15 minutes Cure time 2-3 hours Critical recoat time 4 hours 100% UV Stable 4x the abrasion resistance of...
This product is intended for professional use only Quick Specs: Average Coverage: 40m2 per Kit 100% Solids Cured for flake recovery in 2 hours Recoat time: 1.5 - 2 hours Pot life 3-5 minutes Working time on floor: 15-20 minutes Primer/Base Coat in one...
The E2U Flake System You get a total of 11.33kgs per box! Part of our Flake floor same day install system along with 6150RC and Polyaspartic85 ULTRA or PolyasparticRC. Quick Specs: 30m2 typical coverage per box at full broadcast (not allowing for reclaim) 1/4"...